Your existing hardwood floors are an important part of your property and your investment and it is critical to realize that whilst most wooden floors, if looked after correctly, will outlast you. However certain wooden floors can only be sanded a limited number times before they deteriorate. Therefore it is important to use a good sealer to protect your floors at the outset and re-coat again before the sealer wears down to bare wood, especially in high traffic areas like passages and staircases. So when getting quotes, enquire what sealers are being used and how many coats will be applied, as normally 3 coats is recommended to protect the floor properly for most sealers.

We can offer a variety of Water based Sealers and solvent sealers which may vary according to price.


Water Based vs. Solvent Based Sealers


Water Based Polyurethane

Environment  friendly- no fumes
Keeps the natural colour of your wood-does not darken or yellow over time.
Touch dry after 2 hours after each coat.
Can be buffed and coated in the future, saving you money.
Air bubbles do not occur.
Has a more natural appearance.


Solvent Based Polyurethane

Has strong toxic fumes, cannot stay in the house.
Yellow’s and darkens over time.
Touch Dry in 6 to 8 hours.
Cannot be buffed & coated in the future but rather re sanded and sealed from start.
Prone to air bubbles/fisheyes which may be visible after sealing.
High gloss finish.


Water based Polyurethane Hardwood Sealers


Solvent Based Polyurethane Hardwood Sealers


GORI 51 High Traffic Floor Finish is a clear, water based (acrylic-polyurethane) floor finish for wooden flooring. This product is produced in Denmark.   

Link :



Timbergleam (A50) Sealer

This product is locally produced and is generally used as a primer and first coat but can also be used on its own as a sealer with 3 coats applied. However it does not contain polyurethane and is therefore not as durable as polyurethane sealers. It is available in Satin and Gloss Finish.


LOBA is a leading German manufacturer of finishing and care systems for parquet & hardwood.

Link to Life Gloss


Good resistance to mechanical wear.

Plascon PU 2000 Pure Coat Clear Gloss


This is a Polyurethane Enamel which is extremely durable and is resistant to alcohol, water, food etc. It dries to a high gloss finish with good marking resistance properties and is suitable for most areas except for heavy wheeled traffic and any high chemical resistance requirements.
Purecoat is extremely durable.







BONA RESIDENT PLUS is a new 1-component waterborne 100% polyurethane finish for the surface treatment of wooden floors in residential and other areas subject to domestic wear. Bona Resident Plus ensures a non-yellowing surface, enhancing the natural beauty of the wooden floor.



BONA MEGA is a one-component waterborne 100% polyurethane wood floor finish for the treatment of wood floors in commercial and domestic areas subject to heavy wear. It has all the advantages of a waterborne system but still gives a deep, rich colouration similar to a solvent based finish. Bona Mega is fast drying and dries in up to 2 to 3 hours. It is available in gloss, semi gloss and satin finishes.










BONA TRAFFIC HD Is a 2 component system which offers powerful invisible protection. It is the most hardwearing of all the water based sealers in the Bona range. Taking performance even further, Bona Traffic HD offers significantly greater scratch, scuff and chemical resistance only 24 hours after application.









Oils and Waxes


  • Rubiomonocoat

    Free of water and VOC Rubio Monocoat Oil Plus does not contain water: its components are mainly natural products. The unique Rubio Monocoat Oil Plus pigmentation technology allows an intense and deep colouring in one single layer, without influencing the natural look and feel of the wood. Rubio Monocoat Oil Plus adheres with the first microns of the wood by molecular bonding (with no film forming nor saturation). The molecular bonding creates a durable, long lasting protection. Link to











    When using oils, the natural finish of the wooden floor is retained. Oil floors are less prone to slippage.

    • Oils need to be maintained and re-oiled every year.
    • Oils allow the floor to breath









Wood Floor Fillers


Bona Mix &Fill Plus


The Bona Mix & Fill Plus is a water borne gap filler with a filling capacity equal to solvent-based alternatives. Its high filling capacity, short drying time and good abrasion properties make it an exceptionally reliable product. Bona Mix & Fill Plus also offers the benefit of a very nice and natural colouration both with oil and finish.



Loba WS EasyFill Plus


Waterborne binder, which can be mixed with sanding dust for the preparation of wood filler and is fast drying.








Technical Information



Sand Paper

imagesCA446II4KLINGSPOR: A German based company

KLINGSPOR have set worldwide standards in abrasive technology for more than 100 years.

See Link